Cleaning And Lubrication Of Inkjet Printers

1. Cleaning of the printer

The cleaning of the printer mainly refers to: cleaning the dust inside the printer or the dust and paper dust in the paper feeding passage with a vacuum cleaner, and carefully brushing the printer paper feeding mechanism (such as the automatic paper feeding shaft and paper feeding rubber cam) with a soft brush. Dust and often keep the printer casing clean.

2. Cleaning of the inkjet head

Almost all inkjet printers have an automatic cycle cleaning function for the inkjet head to ensure that the ink injection nozzle is in an optimal state. If the print quality is found to be degraded (such as print characters lacking strokes, printing color casts, or partial chromatic aberration), The cleaning operation procedure should be performed, and the specific operation method varies depending on the printer model. Some printers have a prompt on their cover. Just follow the suggested instructions.

3. Replacement of waste ink recycling bin

When the ink in the waste ink recovery tank fills the entire waste ink absorbing material (usually made of felt), the waste ink will overflow the outer squeegee and flow out from the bottom of the printer, and some printers may even contaminate the main control board. Causes damage to the printer. At this point, open the top cover of the printer, remove the absorbent material that has been filled with waste ink from the waste ink recovery box under the inkjet head cleaning device, and put in a clean absorbent material (usually wool felt) and reinstall the printer. Just fine.

4. Lubrication of moving parts

When your printer replaces components, or when the printer's working noise exceeds the standard, you need to use the printer's special oil (you can also use sewing machine oil or transformer oil) to lubricate the following places: word car guide, word car sliding sleeve and shaft, go Gears and rollers of the paper mechanism.