How To Use The MFP

(1) Regularly clean the platen and optical mirrors. The integrated printer scans the original after scanning through the platen and the mirror. If the platen and the mirror are contaminated, the resolution of the printed matter will be reduced. If the user has regular alcohol, use absorbent cotton or tissue paper to dip a little alcohol. It is better to carry out the cleaning. It is forbidden to put the manuscript coated with the correction liquid into the platen for plate making, because the dry correction liquid will contaminate the platen, so that the printed matter has black spots and black bars.

(2) Do not use inferior paper. The principle of the integrated printing machine is to convert the original optical signal into an electrical signal through the CCD element, and the inferior paper which is heated and plated by the heat-sensitive device and then printed, the paper is large in gray and has a large frictional force, and is easily contaminated and scratched. Injury the thermal device.

(3) Do not use inferior ink or bulk ink. Inferior inks have high viscosity, high oil content, and even oil-water separation. Such inks tend to block the oil pump and the gauze, causing short circuit of the oil circuit and insufficient ink supply, which makes the printed matter surface dirty, and the writing is blurred. In severe cases, the printing device is damaged.

Clean the paper path and the pickup roller frequently. The integrated printing machine generally uses stencil printing paper. The stencil printing paper is much larger than the copy paper, and the paper ash pollution is relatively serious. The cleaning paper path and the pickup roller can effectively reduce the machine card. Paper rate and failure of mechanical parts and sensors caused by paper ash contamination. If the user has a blowing air bag, the paper dust is often cleaned to reduce the occurrence of malfunctions.