Problems That Should Be Paid Attention To During The Use Of The Ribbon

1. Before installing the ribbon, apply the hand to rotate the gear a few times according to the specified direction of rotation. After installing the ribbon, you need to turn a few more turns to check if the ribbon is installed properly, and whether the core is working properly, otherwise it will be easy to smash. The phenomenon of ribbons.

2. For the ribbon with the supplementary inking device, when the printing imprint is shallow, the ink should be replenished according to the inking method specified by the ribbon (such as inserting iron sheets, etc.) to restore the printing imprint to normal.

3. Low-density core is suitable for 9-pin printers. Generally, it is not used for 24-pin printers. Otherwise, the density of the print pins is high due to the low density of the base tape, the life of the ribbon will be greatly shortened, and sometimes the print speed will be hung up. needle.

4. Do not work continuously for a long time during printing, so as not to affect the printer and ribbon life.

5. The ribbon is generally divided into a twisted belt and a straight belt. The difference between a twisted-belt printer and a straight-line printer is the position of the print head. The straight-belt printer is placed in the middle of the ribbon, and the twist-wrap printer is placed on the upper or lower part of the ribbon, so that the double-sided printing can be performed to improve the life of the ribbon. Nearly doubled. When assembling the ribbon, be sure to install the matching ribbon according to the structure of the printer.